What Is the Price of Plywood in India?
Plywood price in India runs from about Rs 28 per sq ft for a 6 mm MR grade board to about Rs 210 per sq ft for 19 mm marine and fire retardant plywood. On a standard 8 ft x 4 ft sheet, that is roughly Rs 1,850 at the entry end and Rs 6,700 at the top end. This page gives the current rate bands by grade and thickness, the thickness rule that lets you check any quote in your head, the city variation across India, and the seven checks that tell you whether the board in front of you is the board on the invoice.
All rates are per square foot, exclusive of 18% GST. Rates last reviewed September 2026. For a firm rate on an Advance Ply grade in your city, call 1800-203-3359.
Free technical help
Not sure which grade your rooms need?
Send your floor plan or your carpenter list and get the current rate for your city, the grade each room actually needs, and the nearest dealer holding it in stock.
Why the same plywood sheet price varies from Rs 55 to Rs 125?
If you are building a kitchen in Delhi, a wardrobe run in Gurgaon or a full 3BHK fit-out anywhere in the country, you have already had this experience. One shop in Kirti Nagar quotes Rs 55 per sq ft for an 18 mm sheet. A hardware shop in Gurgaon quotes Rs 125 for what looks like the same board. A contractor tells you he can get boiling water proof ply for Rs 45.
Three shops, three rates, and no explanation of what changed between them.
There is no single fixed price for plywood in India, and there is a reason for that. The word plywood covers boards that share a shape and almost nothing else. Two 18 mm sheets stacked side by side can differ in core timber, bonding resin, number of press cycles, emission class, preservative treatment and warranty length, and every one of those is a cost. The rate gap between them is not a discount. It is a specification gap.
That matters because buying on the lowest quote is how furniture fails. A moisture resistant board in a kitchen sink cabinet does not fail on the day you install it. It fails in the second monsoon, after the laminate is on, the hardware is fitted and the carpenter has left.
What we see go wrong, and what it costs
A common pattern in Gurgaon and Noida monsoon kitchens. A homeowner is persuaded to take unbranded 18 mm boards described as waterproof at Rs 62 per sq ft, saving about Rs 40,000 against a certified marine grade board across the flat. The boards look sturdy on the day.
Ten months later the sink module absorbs moisture and swells. Water travels along the core gaps into the adjoining run. Powder borers reach the bedroom wardrobes. The modular kitchen and the bedroom cabinetry both come out, and the acrylic laminate, the hardware and the carpentry go with them.
The board was Rs 40,000 cheaper. The redo cost about Rs 3,50,000, and none of it was the plywood.
The rest of this page is the information that prevents that. Real rate bands so you know what a grade should cost, the specification behind each band so you know what you are paying for, and the checks that tell you at the counter whether you are getting it.
Not sure which grade your kitchen needs?
Ask before you order, not after.
Plywood Price 2026 at a Glance
This is the band any plywood sheet price quoted to you in India should sit inside. A quote outside it usually means the grade is not what the invoice says, or something is being loaded on top. Use it as your benchmark when you review a contractor estimate or a ply sheet price sent over WhatsApp.
| Grade | Standard | 6 mm | 12 mm | 19 mm | 19 mm sheet (8×4) |
|---|---|---|---|---|---|
| MR (Moisture Resistant) | IS 303 | Rs 28 to 47 | Rs 39 to 66 | Rs 58 to 98 | Rs 1,856 to 3,136 |
| BWR (Boiling Water Resistant) | IS 303 | Rs 42 to 59 | Rs 59 to 82 | Rs 88 to 122 | Rs 2,816 to 3,904 |
| BWP (Boiling Water Proof) | IS 303 / IS 710 | Rs 47 to 74 | Rs 66 to 104 | Rs 98 to 155 | Rs 3,136 to 4,960 |
| Marine Grade | IS 710 | Rs 61 to 101 | Rs 86 to 141 | Rs 128 to 210 | Rs 4,096 to 6,720 |
| Fire Retardant | IS 5509 | Rs 67 to 101 | Rs 94 to 141 | Rs 140 to 210 | Rs 4,480 to 6,720 |
All rates are per square foot unless marked as a sheet, and exclusive of 18% GST. Indicative 2026 ranges; confirm the current rate with your dealer.
Three readings that matter when you compare quotes:
- Moving from MR to marine grade roughly doubles the rate at the same thickness. The resin changes from urea formaldehyde to phenol formaldehyde and the core specification rises with it.
- Moving from 6 mm to 19 mm roughly doubles it again.
- A fire retardant board carrying IS 5509 sits at marine grade money even when it is not marine grade, because the fire chemistry is the expensive part.
The Full Grade and Thickness Grid
Most buyers get quoted one thickness and then guess at the rest. This grid gives the ply sheet price band for every running thickness, so a carpenter can price a full cutting list in one pass instead of working back from a single plywood sheet price for one board.
| Grade | Standard | 6 mm | 9 mm | 12 mm | 16 mm | 18 mm | 19 mm |
|---|---|---|---|---|---|---|---|
| MR (Moisture Resistant) | IS 303 | 28 to 47 | 33 to 56 | 39 to 66 | 50 to 84 | 55 to 93 | 58 to 98 |
| BWR (Boiling Water Resistant) | IS 303 | 42 to 59 | 50 to 70 | 59 to 82 | 76 to 105 | 84 to 116 | 88 to 122 |
| BWP (Boiling Water Proof) | IS 303 / IS 710 | 47 to 74 | 56 to 88 | 66 to 104 | 84 to 133 | 93 to 147 | 98 to 155 |
| Marine Grade | IS 710 | 61 to 101 | 73 to 120 | 86 to 141 | 110 to 181 | 122 to 200 | 128 to 210 |
| Fire Retardant | IS 5509 | 67 to 101 | 80 to 120 | 94 to 141 | 120 to 181 | 133 to 200 | 140 to 210 |
All figures in rupees per square foot, exclusive of 18% GST. Bands cover economy through premium brands.
Where each Advance Plywood grade sits in these bands?
Advance Ply is the flagship board brand of Amba Panel India Private Limited, manufacturing from Hapur in Uttar Pradesh with a corporate office at Sector 62, Noida, and supplying through more than 500 dealers across 16 states. Every grade below is pressed four times through the HEXAPRO process and bonded using HVRT, High Viscous Resin Technology.
Rather than a fixed rate, this table tells you which band each product belongs in and what specification you are paying for inside that band. Read it alongside the grid above and you can check any quote you are given.
| Product | Grade and standard | Construction | Emission class | Warranty | Band it sits in |
|---|---|---|---|---|---|
| Advance Ply MMR10 | MR, IS 303 | Alternate | Not stated | 10 years | Lower half of MR |
| Advance Ply MMR10 Plus | MR, IS 303 | Hardwood | Not stated | 15 years | Middle of MR |
| Advance Ply Gold MMR25 | MR, IS 303, 25% more moisture resistance | Alternate | Not stated | 15 years | Middle of MR |
| Advance Ply Gold MMR25 Plus | MR, IS 303, 25% more moisture resistance | Hardwood | Not stated | 25 years | Upper half of MR |
| Advance Ply 710 | BWR, IS 303, 72 hrs at 100 C | Alternate | Not stated | 15 years | Middle of BWR |
| Advance Ply PF | BWP, IS 303, up to 200 hrs | Alternate | E1 | 20 years | Lower half of BWP |
| Advance Ply Gold | BWP, IS 303, up to 200 hrs | 100% hardwood | E1 | 30 years | Upper half of BWP |
| Advance Ply Gold FR | Fire retardant, IS 5509, up to 100 hrs | 100% hardwood | E1 | 30 years | Middle of fire retardant |
| Advance Ply Gold Marine | Marine BWP, IS 710 | 100% hardwood | E1 | 35 years | Upper half of marine |
| Advance Ply Palladium | Marine BWP and IS 5509 | 100% hardwood, CCB treated | E1 | 36 years | Upper half of marine and fire retardant |
| Advance Ply Tungsten | Marine BWP and IS 5509, up to 250 hrs | 13 layer hardwood, CCB treated | E0 | Lifetime | Top of marine and fire retardant |
Advance Ply Flexi is the flexible grade for curved work at 5 mm to 11 mm. Advance Ply Shuttering Plywood is the film faced board for concrete formwork.
Two products in this list have no direct equivalent at their band anywhere in the Indian market. Tungsten and Palladium carry IS 710 marine certification and IS 5509 fire retardant certification on the same board. Almost every other brand sells those as two separate products, which on a project needing both means two orders, two rates and two inventory lines.
Why Advance Plywood does not publish a fixed price list?
A single national price would be wrong almost everywhere, and buyers who have been quoted three different rates for the same board already know why.
- Freight and city cost: The same sheet carries a different landed cost in Lucknow and in Mumbai. A published national rate would be wrong in both places.
- Quantity: A four sheet retail purchase and a 400 sheet project order are priced differently everywhere in the trade. One number pretends they are the same.
- Dealers set final retail: Advance Ply supplies through more than 500 authorised dealers who carry local stock, local delivery and local credit. Their landed cost, overheads and service levels differ, and the final rate is theirs to quote.
- Rates move: Timber, resin and freight all move through the year. A price list published in January and read in September misleads the person reading it.
What this page gives you instead is the honest version. The real market bands, the thickness rule to check any quote against, the city multipliers, and the specification behind each grade so you can tell whether a low rate is a good deal or a different board. For a firm number on a specific grade, thickness and quantity in your city, one call gets you the current rate and the nearest dealer holding stock.
How Thickness changes the Plywood sheet price?
Plywood price does not rise in a straight line with thickness, and this is where buyers over-order or overpay. Across the Indian market the rate follows a consistent curve against the 19 mm rate.
- 6 mm sits at roughly 48% of the 19 mm rate
- 9 mm sits at roughly 57%
- 12 mm sits at roughly 67%
- 16 mm sits at roughly 86%
- 18 mm sits at roughly 95%
- 19 mm is the reference at 100%
Two ways to use this. If a dealer quotes you 19 mm and you want to check the 12 mm quote, multiply by 0.67. A 12 mm quote that lands at 85% of the 19 mm rate is not a thickness quote, it is a margin quote. And the gap between 18 mm and 19 mm is only about five percent, so paying for 18 mm to save money on a kitchen carcass rarely makes sense. Take the 19 mm.
The exception is 6 mm and 9 mm back panels, where the per sq ft rate looks cheap but you consume a lot of area. On a full wardrobe run, back panels can be a fifth of the total cost of plywood sheet even though nobody quotes them first. Price the backs at the same time as the carcass, not after.
Rate Per sq ft is not the price you pay
Every plywood price quoted in India is a rate per square foot on a bare board. Four things sit between that number and your final bill, and none of them appear in a price list. Together they are why the cost of plywood sheet on a delivered invoice runs well above the rate you were quoted on the phone.
- GST at 18%: Plywood falls under HSN 4412. A board quoted at Rs 128 per sq ft costs Rs 151 per sq ft on a tax invoice. Ask whether a quote is inclusive or exclusive before you compare two dealers. This single question explains most of the gap between quotes that look far apart.
- Wastage of 8% to 12%: A cutting list never uses a full sheet. Budget one extra sheet for every eight to ten on a straight layout, and one in seven on an L-shaped kitchen or a design with many small components.
- Cutting charges: Most dealers charge per cut or per sheet for panel saw cutting. Small, but quoted separately.
- Delivery and unloading: Free above a minimum order value at most counters, chargeable below it. Upper floors without a lift are almost always chargeable.
A quote of Rs 128 per sq ft on 19 mm marine grade, with GST, ten percent wastage and delivery, lands closer to Rs 170 per sq ft of finished furniture. That is the number to plan against, and it is why a ply sheet price on its own tells you less than half of what you will actually spend.
9 things that move the cost of plywood sheet
When you evaluate a plywood sheet price you are not paying for wood. You are paying for core timber, resin chemistry, press cycles and structural integrity. These are the nine that decide the rate.
1. Grade and resin:
BWP grades are bonded with phenol formaldehyde, MR grades with urea formaldehyde. Phenol resin costs materially more and it is the biggest single line item between an MR plywood price and a marine one.
2. Core species:
A 100% hardwood core costs more than an alternate or mixed core, and it is the main reason two boards of the same thickness differ sharply in weight and price. In the Advance Ply range, Gold, Gold Marine, Palladium, Tungsten, Gold FR, MMR10 Plus and Gold MMR25 Plus are hardwood construction. 710, PF, MMR10 and Gold MMR25 are alternate construction.
3. Core gaps and screw retention:
Low cost boards carry hollow gaps between the core strips. You cannot see them once the board is in a cabinet, but they are where a hinge screw finds nothing to bite into and where water travels along the sheet. Advance Ply premium grades hold screws above 1600 N against roughly 800 to 1000 N for ordinary commercial ply. That number is what a filled, tight core buys you.
4. Number of pressings:
Advance Ply boards go through four hydraulic pressings under the HEXAPRO process, against the single or double pressing common at the commercial end. Extra press cycles cost time and energy per sheet, and they are why the same nominal grade can differ by twenty percent between brands.
5. Calibration:
A modular kitchen needs uniform thickness across every sheet so that CNC machines and edge banding lines fit parts without adjustment. Advance Ply boards are calibrated on both sides across the range. Uncalibrated ply produces uneven shutters and visible gaps, and the cost of that shows up in carpentry time rather than in the invoice.
6. Certification:
An IS 710 or IS 5509 licence carries testing, audit and compliance cost that an uncertified board does not. Advance Ply holds IS 303, IS 710, IS 1659, IS 2202 Part 1, IS 4990 and IS 5509 licences along with ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018.
7. Chemical treatment:
CCB core treatment at 12.5 kg per cubic metre preservative retention, which protects the full depth of the board against termite and borer attack, costs more than a glue line treatment. Tungsten and Palladium carry CCB core treatment, with anti fungal treatment across every glue line.
8. Emission class:
E0 resin with near zero formaldehyde emission costs more than E1, which costs more than E2. Advance Ply Tungsten is E0. Palladium, Gold Marine, Gold FR and Gold are E1. Both sit well below the uncontrolled urea formaldehyde adhesives used in unbranded boards, which is what you are smelling when a board stings your eyes in a showroom.
9. Warranty length:
A lifetime warranty board and a 10 year warranty board are not the same product with different stickers. The warranty is priced into the sheet because the manufacturer is carrying the risk.
What you are actually comparing between brands?
Two boards at the same plywood price can be very different products. These are the six specifications worth putting side by side before a rate comparison means anything. Ask for all six from whichever brand is being offered to you.
| Specification | What to ask for | Advance Ply reference |
|---|---|---|
| IS licence and CM/L number | The number printed on the board edge, checkable on the BIS Care app | IS 303, IS 710, IS 1659, IS 2202 Part 1, IS 4990, IS 5509 |
| Boiling water performance | Hours at 100 degrees Celsius, not a marketing word | Up to 250 hours on Tungsten, up to 200 on Gold and PF, 72 hours on 710 |
| Screw holding | Newtons, from the technical specification sheet | Above 1600 N on premium grades against roughly 800 to 1400 N for ordinary commercial ply |
| Density | Grams per cubic centimetre | 0.75 to 0.78 on hardwood grades, 0.65 on 710 |
| Emission class | E0, E1 or E2 | E0 on Tungsten, E1 across Palladium, Gold Marine, Gold FR and Gold |
| Preservative treatment | Core treatment with retention figure, or glue-line only | CCB core treatment at 12.5 kg per cubic metre on Tungsten and Palladium |
Most brands in the Indian market publish two or three of these six. A plywood sheet price compared without them is a comparison of packaging.
City-wise plywood price variation
The same board does not carry the same rate in Patna and Mumbai. Freight, dealer density and warehouse cost all move it. Apply these multipliers to the bands above.
| City or belt | Multiplier on base rate | Why |
|---|---|---|
| Delhi NCR, Noida, Ghaziabad, Gurugram | 0.95 to 1.00 | Largest timber and panel market, high dealer density |
| Uttar Pradesh, Hapur, Meerut, Lucknow, Kanpur | 0.92 to 0.98 | Close to the Advance Ply manufacturing unit, lowest freight |
| Punjab, Haryana, Chandigarh, Ludhiana | 0.96 to 1.02 | Short haul from the north Indian belt |
| Bihar, Jharkhand, Patna, Ranchi | 0.98 to 1.05 | Longer haul, thinner dealer density in tier-3 towns |
| Rajasthan, Jaipur, Jodhpur | 0.98 to 1.04 | Distance offset by strong furniture demand |
| Madhya Pradesh, Chhattisgarh, Indore, Bhopal, Raipur | 0.98 to 1.05 | Central freight corridor |
| Gujarat, Ahmedabad, Surat | 1.00 to 1.06 | Strong demand, higher warehousing cost |
| Maharashtra, Mumbai, Pune, Nagpur | 1.05 to 1.12 | Highest storage and last-mile cost in the country |
| Odisha, Bhubaneswar | 1.00 to 1.06 | Coastal humidity pushes demand toward BWP grades |
| Chennai and Tamil Nadu | 1.02 to 1.08 | Long haul from the northern manufacturing belt |
A worked example. Marine grade 19 mm at a market mid rate of about Rs 169 per sq ft lands near Rs 160 in Lucknow and near Rs 185 in Mumbai, before GST. That spread is normal and is not a reason to suspect a dealer. It also means a ply sheet price quoted to a friend in another state is a weak benchmark for your own city.
What does plywood cost for a real project?
Rate per square foot means little until it is multiplied by a cutting list. Start by working out what grade each room actually needs, because that decision moves the budget more than any negotiation with a dealer.
Step 1. Match the grade to the room
| Where it is going | Grade to ask for | Rate per sq ft |
|---|---|---|
| Kitchen modules and bathroom cabinets | 18 mm marine grade, IS 710 | Rs 122 to 200 |
| Bedrooms, TV units, wardrobes | 18 mm BWR or BWP | Rs 84 to 147 |
| Wardrobe backing and drawer bottoms | 6 mm or 9 mm BWR or BWP | Rs 42 to 88 |
| Commercial workspaces and kitchen fire zones | 18 mm fire retardant, IS 5509 | Rs 133 to 200 |
Step 2. Multiply area by rate
A standard full sheet in India is 8 feet by 4 feet, which is 32 square feet. So the plywood sheet price is always the per sq ft rate multiplied by 32. If your carpenter calculates 25 sheets of 18 mm BWP at an average of Rs 125 per sq ft:
Worked example
32 sq ft × Rs 125 per sq ft = Rs 4,000 per sheet
Rs 4,000 × 25 sheets = Rs 1,00,000 total plywood cost, before GST
Add 18% GST and 10% cutting wastage and budget about Rs 1,28,000.
If a dealer quotes a sheet price that does not reconcile to 32 times the rate they gave you five minutes earlier, ask which number is real.
Step 3. Check it against a typical project
| Project | Sheets needed | Suggested grade | Plywood budget |
|---|---|---|---|
| Study table | 1 to 2 sheets of 19 mm | MR | Rs 1,850 to 6,300 |
| TV unit, standard | 2 to 3 sheets of 19 mm | MR | Rs 3,700 to 9,400 |
| Bathroom vanity | 2 sheets of 19 mm | Marine | Rs 8,200 to 13,400 |
| Straight 8 ft wardrobe | 8 to 12 sheets of 19 mm plus 6 mm backs | MR or BWP | Rs 14,800 to 37,600 |
| L-shaped modular kitchen | 10 to 14 sheets of 19 mm plus 6 mm backs | Marine | Rs 41,000 to 94,000 |
| Full 2BHK interiors | 60 to 80 sheets, mixed grades | MR dry, BWP wet | Rs 1,87,000 to 2,70,000 |
| Full 3BHK interiors | 80 to 120 sheets, mixed grades | MR dry, BWP wet | Rs 2,88,000 to 4,16,000 |
Plywood only, excluding GST, hardware, laminate and labour.
Free project estimate
Send us your floor plan or your carpentry bill of quantities
Get exact sheet quantities with wastage calculated, and a transparent rate for your city.
The cheapest plywood price is rarely the lowest cost
Buying a grade below what the location needs is the most expensive decision in an interior budget, because replacement means tearing out finished carpentry, not just buying another board.
One way to compare honestly is cost per square foot per year of warranty. The figures below use the market mid rate for each grade band, so they compare warranty value at a like for like price point rather than comparing brands on price.
| Product | Grade band | Warranty | Cost per sq ft per warranty year |
|---|---|---|---|
| Advance Ply Gold MMR25 Plus | MR | 25 years | Rs 3.12 |
| Advance Ply Gold | BWP | 30 years | Rs 4.22 |
| Advance Ply Tungsten | Marine and Fire retardant | Lifetime, costed at 40 years | Rs 4.22 |
| Advance Ply Palladium | Marine and Fire retardant | 36 years | Rs 4.69 |
| Advance Ply Gold Marine | Marine | 35 years | Rs 4.83 |
| Advance Ply MMR10 Plus | MR | 15 years | Rs 5.20 |
| Advance Ply Gold MMR25 | MR | 15 years | Rs 5.20 |
| Advance Ply Gold FR | Fire retardant | 30 years | Rs 5.83 |
| Advance Ply PF | BWP | 20 years | Rs 6.33 |
| Advance Ply 710 | BWR | 15 years | Rs 7.00 |
| Advance Ply MMR10 | MR | 10 years | Rs 7.80 |
Read that column from the top. At the same band rate, a 25 year MR board costs Rs 3.12 per sq ft per year of cover while a 10 year MR board costs Rs 7.80. That is two and a half times as much for the same grade of material. The warranty, not the headline plywood price, is where the value sits.
One caveat keeps this honest. Cost per warranty year only applies when the grade suits the location. An MR board in a kitchen sink cabinet has a warranty that will not cover water failure, so its cost per year is meaningless. Match the grade to the moisture first, then optimise the rate.
How to check you are paying for the grade you were quoted?
Grade substitution at the counter is why two dealers can quote the same product thirty percent apart. A low plywood sheet price is only a saving if the board behind it is the board on the invoice. Seven checks, and five of them take under a minute at the shop.
1. Read the edge stamp:
Every ISI licensed board prints the IS number, grade, thickness, sheet size, date of manufacture and CM/L licence number along the edge. A blank edge, a smudged edge, or a stamp showing placeholder values is a reason to refuse the sheet. Check the CM/L number on the BIS Care app while you are standing there.
2. Match the IS number to the claim:
IS 710 is marine grade. IS 303 covers MR and BWR. IS 5509 is fire retardant. IS 1659 covers block boards. A board stamped IS 303 and sold at a marine plywood price is not marine. Note also that the 72 hour boiling water test belongs to IS 710. MR and BWR grades under IS 303 are tested by water immersion cycles, not a 72 hour boil.
3. Lift the sheet:
Weight is the fastest tell there is, because density is the one thing a seller cannot fake with a sticker.
| Board at 18 mm, 8 ft x 4 ft | Density | Sheet weight |
|---|---|---|
| Advance Ply hardwood grades | 0.75 to 0.78 g per cm³ | 40 to 42 kg |
| Advance Ply 710 | 0.65 g per cm³ | about 35 kg |
| Poplar or rubberwood commercial board | 0.42 to 0.50 g per cm³ | 22 to 27 kg |
If two sheets are quoted as the same grade and one is fifteen kilos lighter, they are not the same board.
4. Look at the cut edge:
Plies should be tight and even, with no visible gaps, overlaps, filler patches or dark hollow pockets between the veneer layers. Core gaps are where screws lose grip and where water travels. Reject a board that shows them.
5. Smell the board:
A strong, stinging chemical smell that catches your eyes or throat indicates uncontrolled urea formaldehyde glue. E0 and E1 boards are close to odourless. This is the check that matters most in a bedroom or a child’s room, where the board sits in an enclosed space for years.
6. Ask for the technical specification sheet:
Advance Ply publishes density, screw holding, compressive strength, boiling water hours, emission class and preservative retention for every grade. A dealer selling on rate alone will not have this for the board being offered.
7. Collect the warranty certificate at billing:
It must carry the dealer stamp, the invoice number, the product name and the thickness. A 35 year warranty you cannot evidence is not a 35 year warranty, and it was part of what you paid for.
8. Hold until confirmed
Verify the QR code. Genuine Advance Ply boards carry a QR code linking to the batch record and the digital warranty certificate. Scan it before billing. Publish only if the QR and digital warranty system is live. If it is not, delete this check.
What makes Advance Ply different?
Advance Ply has manufactured plywood since 1991 and has served more than 5,17,000 families through a network of over 500 dealers across 16 states. These are the five things behind the rate.
1. HVRT, High Viscous Resin Technology:
A high viscosity resin system that gives deep, even penetration through the glue line rather than sitting on the surface of the veneer, combined with the HEXAPRO process of four hydraulic pressings. Together they produce the tight, gap free core that screw holding above 1600 N depends on.
2. IS 710 marine certification:
Marine grade under IS 710 must survive a 72 hour boiling water test to hold its licence. Advance Ply Tungsten is rated up to 250 hours and Gold and PF up to 200 hours, well beyond the standard’s minimum, which is what keeps a board stable in a kitchen or bathroom over decades rather than seasons.
3. E0 and E1 resins:
Advance Ply Tungsten uses E0 grade resin for near zero formaldehyde emission and carries the IATC indoor air toxicity compliant mark. Palladium, Gold Marine, Gold FR and Gold use E1 grade resin. Both classes sit well below the uncontrolled adhesives used in unbranded boards, which matters in a bedroom, a school or a hospital where the board sits in enclosed air.
4. Fire retardant to IS 5509:
Tungsten, Palladium and Gold FR carry IS 5509 certification, using nano alumina fire retardant glue and a nano flame guard coating that slow flame spread and reduce smoke density. Tungsten and Palladium carry IS 710 and IS 5509 on the same board, so one product covers both a wet area and a fire specification.
5. A warranty that is written down:
Every sheet is backed by an official stamped warranty certificate, from 10 years on MMR10 up to a lifetime warranty on Tungsten. Tungsten and Palladium also carry CCB core treatment at 12.5 kg per cubic metre retention, protecting the full depth of the board against termite and borer attack, with anti fungal treatment across every glue line.
Talk to an Advance Ply technician for material selection on your project, and get a factory verified rate for your city through your nearest authorised dealer.
Free physical sample kit available on request. Ask for it when you call, and see the board before you commit.
Block board, flush door and shuttering rates
Interior budgets rarely stop at plywood, so these are the adjacent market bands.
- Block boards licensed under IS 1659 run roughly Rs 60 to 150 per sq ft at 19 mm across the market depending on tier. The Advance Ply block board range is built on 100% imported pine frames and battens, with Block Board Tungsten on a lifetime warranty, Palladium at 36 years, Gold at 30, 710 at 20 and Gold MMR-25 at 15. Block board is the right call for door shutters, table tops and long wardrobe shutters where plywood would sag.
- Flush doors are quoted per shutter rather than per square foot, and the rate depends on the frame opening. The Advance Door range runs from a 12 year 9 ply shutter up to the lifetime warranty fire retardant Advance Door Tungsten, made to IS 2202 Part 1.
- Shuttering plywood, film faced for concrete formwork, runs roughly Rs 78 to 130 per sq ft at 12 mm to 18 mm across the market. Contractors should compare it on repetitions rather than rate, since the number of pours a board survives decides the real cost per pour.
- Advance EdgeMatch PVC edge band tape runs 22 mm to 55 mm across more than 350 designs and is quoted per metre or per roll.
How to Get an Accurate Advance Plywood Quote?
The bands on this page are the market. A firm rate needs four inputs, and any dealer who quotes without them is guessing.
- Grade: decided by moisture exposure at the location
- Thickness: from the cutting list
- Sheet size: standard 8 ft x 4 ft unless specified
- Quantity: since anything above 100 sheets is routed through the regional distributor rather than a retail counter
Call 1800-203-3359 between 9:30 am and 6:00 pm Monday to Saturday, send your requirement on WhatsApp to +91 95208 90405, or write to customerhelpdesk@advanceplywood.com. You get the current rate for your city, the nearest dealer holding that grade in stock, and the technical specification sheet for the board being quoted. Project and tender enquiries should include drawings or a bill of quantities.
Frequently Asked Questions
What is the current plywood price per sq ft in India?
Plywood price in 2026 runs from about Rs 28 per sq ft for 6 mm MR grade to about Rs 210 per sq ft for 19 mm marine and fire retardant board. MR grade at 19 mm sits around Rs 58 to 98, BWR around Rs 88 to 122, BWP around Rs 98 to 155 and marine grade around Rs 128 to 210. All rates are before 18% GST.
What is the plywood sheet price for a standard 8x4 sheet?
A standard sheet is 32 square feet, so the plywood sheet price is the per sq ft rate multiplied by 32. At 19 mm that means roughly Rs 1,856 to Rs 3,136 for MR grade and roughly Rs 4,096 to Rs 6,720 for marine grade, before GST.
What is the price of 19 mm marine plywood?
Marine grade certified to IS 710 runs roughly Rs 128 to Rs 210 per sq ft at 19 mm, which is Rs 4,096 to Rs 6,720 for a full 8×4 sheet before GST. Where a board sits inside that band depends on core construction, emission class, boiling water hours and warranty length.
What is the ply sheet price for 12 mm plywood?
12 mm boards sit at roughly 67% of the 19 mm rate. That works out to about Rs 39 to 66 per sq ft for MR grade and Rs 86 to 141 for marine grade, before GST.
Why does the cost of plywood sheet differ between two dealers?
Four reasons account for almost every gap. One quote includes GST and the other does not. The grade differs even though the thickness matches. The core is hardwood in one and alternate in the other. Or the number of pressings differs, which changes density and screw holding.
What is the GST rate on plywood in India?
Plywood falls under HSN 4412 and attracts 18% GST. Confirm whether a plywood price quoted to you is inclusive or exclusive of tax before comparing quotes.
How much plywood do I need for a modular kitchen?
An L-shaped modular kitchen typically takes 10 to 14 sheets of 19 mm marine grade plus 6 mm for back panels, which puts the plywood only budget around Rs 41,000 to Rs 94,000 at market rates. Add 8% to 12% for cutting wastage.
Is marine plywood worth the extra cost?
In a kitchen, bathroom or utility area, yes. Marine grade uses phenol formaldehyde bonding and withstands sustained moisture. At the same band rate a 35 year marine board works out at Rs 4.83 per sq ft per year of cover against Rs 7.80 for a 10 year MR board. In a dry bedroom it is not necessary.
How can I tell if a plywood sheet is genuine hardwood or cheap poplar?
Lift it. An 18 mm 8×4 board at a hardwood density of 0.75 to 0.78 g per cubic centimetre weighs 40 to 42 kg. A poplar or rubberwood board of the same size weighs 22 to 27 kg. A 15 kilo difference between two boards sold as the same grade means they are not the same board.
What is the price difference between MR and BWP plywood?
BWP typically costs 60% to 100% more than MR at the same thickness, because the bonding resin changes from urea formaldehyde to phenol formaldehyde and the core specification rises with it.
Why does Advance Ply not publish a fixed rate for each product?
Because a single national rate would be wrong almost everywhere. Freight, city cost, order quantity and dealer overheads all move the final number, and the 500 plus authorised dealers who carry local stock set their own retail rate. Call 1800 203 3359 with grade, thickness and quantity for a current rate in your city.
Does plywood price change by city?
Yes. Rates run roughly 5% below base in Uttar Pradesh close to the manufacturing unit and up to 12% above base in Mumbai, driven by freight, storage cost and dealer density.
How do I get a firm quote from Advance Ply?
Call 1800 203 3359, WhatsApp +91 95208 90405 or email customerhelpdesk@advanceplywood.com with grade, thickness, sheet size and quantity. Requirements above 100 sheets are quoted through the regional distributor.
Get a Current Advance Ply Plywood Rate for Your City
Send your floor plan or carpentry bill of quantities and the Advance Ply technical team will calculate exact sheet quantities with wastage included, recommend the grade each room needs, and give you a transparent rate for your city through your nearest authorised dealer.
Toll-free: 1800-203-3359
WhatsApp: +91 95208 90405
Email: customerhelpdesk@advanceplywood.com
Monday to Saturday, 9:30 am to 6:00 pm
Corporate office: 7th Floor, Tower-1, Okaya Centre, Sector 62, Noida, Uttar Pradesh 201309
Manufacturing unit: Khasra No. 315, Village Upeda, Hapur, Uttar Pradesh 245201
Rate bands on this page reflect the Indian market and are exclusive of GST. Dealer rates vary by city, order quantity and freight. Rates last reviewed September 2026.
