Advance Ply
Block Board MMR10
- Home
- All Block Board Range
- Advance Ply Block Board MMR10
- 10 Year Warranty
- IS 1659 Licensed
- MMR10 Resin
- 10% More Moisture Resistance
- 3 Cycles @ 65°C
- Both Side Calibrated
- MMR10 Resin
- 10% More Moisture Resistance
- 3 Cycles @ 65°C
- Tightly Filled Core
- Four Times Pressed
- Both Side Calibrated
Advance Ply Block Board MMR10 is the moisture-resistant tier of the Advance block board range, licensed under IS 1659 and bonded with Melamine Fortified Modified UF Resin MMR-10. The board provides 10% more moisture resistance and completes three extra water-resistance cycles at 65°C, which suits wardrobe shutters, interior doors, partitions and panelling working in normal interior conditions.
The board is pressed four times under HEXAPRO Technology and bonded using High Viscosity Resin Technology, driving resin deeper into the core for consistent adhesion between layers. A tightly filled core with minimum internal gaps and both-side calibration keep thickness uniform and accurate across the sheet, supporting straight cuts, flat laminate pasting and hardware that aligns first time. A 10-year warranty applies.
Why Advance Ply Block Board MMR10 Performs Differently?
10%
More Moisture Resistance
Block Board MMR10 provides 10% more moisture resistance, supporting interior furniture in normal room conditions and areas that see occasional humidity rather than standing water.
3 Cycles
Extra Water Resistance
The board completes three extra water-resistance cycles at 65°C, giving a defined and repeatable performance figure rather than an open claim about moisture handling.
MMR10
Melamine Fortified Resin
Bonding uses Melamine Fortified Modified UF Resin MMR10, a moisture-resistant resin system chosen to hold the bond line stable through changes in interior humidity.
HVRT
High Viscosity Resin Technology
High Viscosity Resin Technology supports deep resin penetration inside the core for strong bonding, so adhesion holds through the depth of the panel rather than only near the faces.
4x
Pressed Construction
The board is manufactured with matt ply and pressed four times to support long life, dimensional stability and consistent panel formation across the full sheet.
HEXAPRO
Manufacturing Technology
Under HEXAPRO Technology the board is pressed four times for strength and given two treatment passes for protection against termite and borer during manufacture.
Calibrated
Both Side Calibration
Both-side calibration delivers uniform and accurate thickness, which supports accurate cutting, flat laminate pasting and hardware that sits square without shimming.
Tight Core
Minimum Internal Gaps
A tightly filled core board with minimum gaps supports panel consistency and dependable performance in doors, shutters and interior partitions carrying fixed hardware.
10 Years
Product Warranty
Advance Ply Block Board MMR10 carries a 10 year warranty, applicable subject to the terms and conditions printed on the Advance Ply warranty certificate.
Recommended Applications for Advance Ply Block Board MMR10
Wardrobe Shutters
Suitable for wardrobe shutters where flat panels, uniform thickness and accurate calibrated thickness matter more than boiling water performance.
Interior Doors
Recommended for interior door shutters and large flat panels needing a tightly filled core and consistent panel formation.
Partitions and Panelling
Useful for interior partitions and wall panelling where dimensional stability and repeatable thickness support clean site fitting.
Interior Furniture
Specified for beds, cabinets, storage units and study furniture built for dry to normal interior room conditions.
Occasional-Moisture Areas
Suited to interior locations that see occasional humidity, using the 10% more moisture resistance and three-cycle water resistance figure.
Laminate and Veneer Work
Both-side calibration and minimum internal gaps support flat laminate pasting, veneer application and a smooth finished surface.
Advance Ply Block Board MMR10 - Technical Specifications
Specification | Value |
|---|---|
Physical and Construction Properties | |
| Plywood Type | IS 1659 licensed moisture-resistant block board |
| IS Standard | IS 1659 licensed product |
| Core Fill | Tightly filled core board with minimum internal gaps |
| Surface Calibration | Both-side calibrated for uniform and accurate thickness |
Resin and Bonding Properties | |
| Resin Type | Melamine Fortified Modified UF Resin MMR10 |
| Bonding Technology | High Viscosity Resin Technology |
Water Resistance Properties | |
| Moisture Resistance | 10% more moisture resistance |
| Water-Resistance Cycles | Three extra water-resistance cycles at 65°C |
Manufacturing | |
| Manufacturing Technology | HVRT Technology + HEXAPRO Process |
| Press Cycles | Four-times pressed |
Warranty | |
| Warranty | 10 year warranty |
Advance Ply Block Board MMR10 vs Ordinary Block Board
| Feature | Advance Ply Block Board MMR10 | Ordinary Block Board |
|---|---|---|
| Resin | Melamine Fortified Modified UF Resin MMR10 | Often not specified |
| Moisture Resistance | 10% more moisture resistance | Not typically specified |
| Water-Resistance Cycles | Three extra cycles at 65°C | May not be provided |
| High Viscosity Resin Technology | Yes, deep resin penetration into the core | May not be provided |
| Boiling Water Resistance | More than 200 hours | Not typically established |
| Press Cycles | Four times pressed under HEXAPRO Technology | Press cycles not declared |
| Thickness Accuracy | Uniform and accurate, calibrated on both sides | Thickness accuracy not declared |
| Core Fill | Tightly filled core, minimum internal gaps | Core gap control not declared |
| IS Licensing | IS 1659 licensed | Must be verified |
| Warranty | 10 year warranty | Varies by brand |
Block Board MMR10 vs Other Advance Ply Block Board Range
| Feature | Block Board MMR10 (this page) | Block Board Gold MMR25 | Block Board 710 |
|---|---|---|---|
| IS standard | IS 1659 | IS 1659 | IS 1659 |
| Resin Type | MMR10 melamine fortified modified UF | MMR25 moisture-resistant resin bonded | True BWR Grade Resin |
| Moisture Resistance | 10% more | 25% more | No |
| Water-Resistance Cycles | 3 cycles at 65°C | 8 cycles at 65°C | No |
| Boiling Water Resistance | No | No | More than 72 hours |
| Core Construction | No | 100% imported pine frames and battens | 100% imported pine frames |
| Both Side Calibration | Yes | Yes | Yes |
| Warranty | 10 years | 15 years | 20 years |
| Best for | Dry to normal interior furniture | Humid interiors and occasional moisture | Moisture-prone interior applications |
Frequently Asked Questions About Advance Ply Block Board MMR10
What is Advance Ply Block Board MMR10 used for?
Advance Ply Block Board MMR10 is used for wardrobe shutters, interior doors, partitions, wall panelling and interior furniture in dry to normal room conditions. It is an IS 1659 licensed moisture-resistant block board with a tightly filled core and both-side calibration, supporting accurate cutting, laminate pasting and hardware alignment.
Is Advance Ply Block Board MMR10 IS 1659 licensed?
Yes. Advance Ply Block Board MMR10 is an IS 1659 licensed product. IS 1659 is the Indian Standard for block boards. The board is pressed four times under HEXAPRO Technology and bonded using High Viscosity Resin Technology, which drives resin deeper into the core for consistent adhesion.
What does 10% more moisture resistance mean in Block Board MMR10?
Advance Ply Block Board MMR10 provides 10% more moisture resistance through Melamine Fortified Modified UF Resin MMR-10, and completes three extra water-resistance cycles at 65°C. This suits interiors that see occasional humidity. It is a moisture-resistance feature, not a substitute for a BWR or BWP grade board.
Is Advance Ply Block Board MMR10 boiling water proof?
No. Advance Ply Block Board MMR10 is a moisture-resistant block board and carries no boiling water rating. For boiling water performance, specify Advance Ply Block Board 710 at more than 72 hours, Block Board Gold or Palladium at more than 100 hours, or Block Board Tungsten at more than 200 hours.
What is the difference between Block Board MMR10 and Block Board Gold MMR25?
Both are IS 1659 licensed moisture-resistant block boards. Block Board MMR10 provides 10% more moisture resistance, three water-resistance cycles at 65°C and a 10 year warranty. Block Board Gold MMR-25 provides 25% more moisture resistance, eight cycles at 65°C and a 15 year warranty.
Advance Ply Block Board MMR10 - Moisture Resistant Block Board
IS 1659 | MMR10 Resin | 10% More Moisture Resistance | 3 Cycles @ 65°C | 10 Year Warranty
