Advance Ply
PF
- Home
- All Plywood Range
- Advance Ply PF
- 20 Year Warranty
- E1 Grade Resin
- 0.72 g/cm³ Density
- >1500N Screw Holding
- >200 Hours BWR
- IS 303 BWP Grade
Thickness Selector
Back panels, drawer bottoms and light decorative backing panels
Partition panels, wall cladding and lightweight furniture components
Internal shelves, cabinet partitions and secondary furniture panels
Doors, shutters and lightweight structural furniture panels
Heavy-duty furniture carcasses, commercial furniture and load-bearing interior applications
Sheet Sizes: Standard 8×4 ft | Also available: 7×4 ft, 6×4 ft, 8×3 ft, 7×3 ft, 6×3 ft
- BWP Grade Plywood
- IS 303 Grade
- E1 MPF Resin
- HVRT Technology
- 4x Pressed
- GLP Protected
Advance Ply PF is IS 303 BWP grade plywood manufactured with E1 MPF BWP grade resin for strong waterproof bonding and long-term durability. Designed for exterior-use furniture and high-moisture interior applications, it provides reliable bonding strength while maintaining uniform panel performance.
PF is suitable for wardrobes, kitchen cabinets, furniture carcasses, partitions, doors, commercial furniture and interior projects where moisture resistance, strength and long service life are required. Its boiling water resistance of more than 200 hours makes it a dependable choice for applications exposed to humidity and occasional water contact.
Each PF sheet is manufactured using HVRT Technology and the HEXAPRO process with 4x hydraulic pressing for deep resin penetration and consistent bonding. The glue line is treated with anti-borer, termite and fungi chemicals, helping protect the plywood against decay, powder formation and insect attack.
Why Advance Ply PF Performs Differently?
E1 MPF
BWP Grade Resin
E1 MPF BWP grade resin provides strong waterproof bonding while supporting lower formaldehyde emission performance for safer indoor use.
IS 303
BWP Grade
IS 303 grade construction is designed for boiling water resistance and dependable use in exterior and high-humidity conditions.
4x
Hydraulic Pressing
Manufactured using the HEXAPRO process and 4x hydraulic pressing for improved strength, bonding and long panel life.
HVRT
Resin Technology
High Viscosity Resin Technology ensures deep resin penetration inside the core for strong bonding between plywood layers.
>200 Hours
Boiling Water Proof
Engineered to withstand boiling water proof for more than 200 hours, supporting long-term waterproofing performance.
GLP
Glue Line Protection
Glue line protection helps resist termite, borer and fungi attack while improving long-term durability of the plywood.
Recommended Applications for Advance Ply PF
Kitchen Cabinets
Suitable for kitchen cabinets, base units and storage furniture exposed to humidity and occasional water contact.
Wardrobes
Recommended for wardrobe carcasses, shutters and bedroom furniture requiring long-term bonding and strength.
Doors and Shutters
Useful for interior doors, shutters and furniture panels where dimensional stability and bonding strength are important.
Commercial Furniture
Suitable for office furniture, storage units, workstations and commercial interiors needing durable BWP grade plywood.
Partitions and Panels
Used for partitions, wall panels and interior plywood applications where water resistance and strength are required.
Exterior-Use Furniture
Can be used in exterior conditions and high-humidity spaces where BWP grade bonding is preferred.
Advance Ply PF - Technical Specifications
Specification | Value |
|---|---|
Physical Properties | |
| Plywood Type | IS 303 BWP Grade Plywood |
| Base Material | Alternate |
| Face Material | Tropical Hardwood Species |
| Core Construction | Alternative Construction, Both Side Calibrated |
| Density | Avg. 0.72 g/cm³ |
| Thickness Range | 6mm to 19mm |
| Standard Sheet Sizes | 8x4 ft, 7x4 ft, 6x4 ft, 8x3 ft, 7x3 ft, 6x3 ft |
| Calibrated | Yes |
| Moisture Content | 5%–15% (Oven Dry Method) |
| Weather Resistance | Withstands Adverse Climatic Conditions |
Chemical Properties | |
| Resin Type | E1 MPF BWP Grade Phenol Formaldehyde Resin |
| Formaldehyde Emission | E1 Grade |
| GLP - Glue Line Protection | Glue line protection to resist termite, borer and fungus attack |
Mechanical Properties | |
| Screw Holding Capacity | More Than 1500 N |
| Modulus of Elasticity (Dry State) | Along Grain: Avg. 7646 N/mm², Min. 7423 N/mm² | Across Grain: Avg. 4230 N/mm², Min. 4065 N/mm² |
| Modulus of Rupture (Dry State) | Along Grain: Avg. 52 N/mm², Min. 48 N/mm² | Across Grain: Avg. 34 N/mm², Min. 29 N/mm² |
| Modulus of Elasticity (Wet State) | Along Grain: Avg. 3845 N/mm², Min. 3656 N/mm² | Across Grain: Avg. 2646 N/mm², Min. 2541 N/mm² |
| Modulus of Rupture (Wet State) | Along Grain: Avg. 29 N/mm², Min. 26 N/mm² | Across Grain: Avg. 26 N/mm², Min. 22 N/mm² |
| Tensile Strength | Along Grain: 53 N | Across Grain: 36 N | Combined: 89 N |
| Glue Shear Strength (Dry State) | Avg. 1456 N/mm², Min. 1346 N/mm² |
| Glue Shear Strength (Wet State) | Avg. 1223 N/mm², Min. 1069 N/mm² |
| Resistance to Microorganism | Average Strength More Than 1500 N |
| Compressive Strength | More Than 5000 N |
Fire and Water Resistance | |
| Boiling Water Proof | Up to 200 Hours, Boiling Water Proof |
| Waterproofing Level | BWP Grade Plywood |
| Fire Resistance | Not a fire-retardant grade |
Manufacturing | |
| Manufacturing Technology | HVRT Technology + HEXAPRO Process |
| Press Cycles | 4x Hydraulic Pressing |
| Bonding System | Phenol Formaldehyde BWP Grade Bonding |
| Calibration | Both Side Calibrated |
Warranty | |
| Warranty | 20 Year Manufacturer Warranty |
Advance Ply PF vs Other Advance Ply Plywood Range
| Feature | PF (this page) | Gold | Gold Marine |
|---|---|---|---|
| IS standard | IS 303:2024 | IS 303:2024 | IS 710:2024 |
| Grade type | BWP Grade | BWR Grade | BWP Marine Grade |
| E1 Grade Resin | Yes | Yes | Yes |
| Fire retardant (IS 5509) | No | No | No |
| Density | 0.72 g/cm³ | 0.75 g/cm³ | 0.75 g/cm³ |
| Warranty | 20 Years | 30 Years | 35 Years |
| Best for | Exterior-use furniture, kitchens, wardrobes and high-moisture interiors | General furniture, wardrobes, cabinets and partitions | Marine, coastal, bathrooms, kitchens and high-moisture applications |
Frequently Asked Questions About Advance Ply PF
What is Advance Ply PF best used for?
Advance Ply PF is suitable for kitchen cabinets, wardrobes, doors, shutters, partitions, commercial furniture and exterior-use furniture where strong BWP grade bonding and moisture resistance are required.
What makes Advance Ply PF different from standard plywood?
Advance Ply PF uses E1 MPF BWP grade resin, HVRT Technology and the HEXAPRO process with 4x pressing. This improves resin penetration, bonding strength and long-term durability under humid conditions.
Is Advance Ply PF boiling water resistant?
Yes. Advance Ply PF is designed for boiling water resistance up to 200 hours, making it suitable for applications where moisture, humidity and occasional water exposure are expected.
Is Advance Ply PF termite and borer resistant?
Yes. Its glue line is treated with chemicals that help resist termite, borer and fungus attack, reducing powder formation, decay and long-term damage.
What is the difference between Advance Ply PF and Gold Marine?
PF is an IS 303 BWP grade plywood for furniture and high-moisture interiors. Gold Marine is an IS 710 marine grade plywood for marine, coastal and continuous high-moisture applications.
Advance Ply PF - BWP Grade Plywood
IS 303 | E1 Grade Resin | HVRT Technology | 20 Year Warranty
